OPRP vs CCP in ISO 22000: what is the difference?
Published on November 17, 2026
Ask a room of food safety professionals to explain the difference between an operational prerequisite programme (OPRP) and a critical control point (CCP), and you will get several different answers. Some will say an OPRP is "a CCP that is not quite critical". Others will say it is a "more important PRP". Neither is accurate, and the confusion regularly shows up in audits.
ISO 22000:2018 is clear on the point, once you look at the definitions and at clause 8.5.2.4. This article explains what each term means, how organizations should decide which is which, and what auditors look for.
Three levels of control
ISO 22000 uses three kinds of control, and it helps to keep them apart:
- Prerequisite programmes (PRPs) are the basic conditions and activities needed to maintain food safety — cleaning and sanitation, pest control, personal hygiene, maintenance, supplier approval, water quality. They are not aimed at a specific significant hazard; they keep the environment under control. We have described them in detail in what are prerequisite programmes (PRPs) in ISO 22000.
- Operational prerequisite programmes (OPRPs) are control measures applied to prevent or reduce a significant food safety hazard to an acceptable level, where an action criterion and measurement or observation enable effective control of the process and/or product.
- Critical control points (CCPs) are steps in the process at which a control measure is applied to prevent or reduce a significant food safety hazard to an acceptable level, and where defined critical limits and measurement enable corrections to be applied.
The first thing to notice: both OPRPs and CCPs control significant hazards. An OPRP is not a general hygiene measure. It is targeted at a hazard that the hazard assessment has identified as significant — just like a CCP.
Critical limits and action criteria
The difference lies in how the control is monitored and what happens when it fails.
- A critical limit separates acceptability from unacceptability. It must be measurable — a temperature, a time, a pH value, a metal detector sensitivity. If the critical limit is exceeded, the product is considered potentially unsafe.
- An action criterion is a measurable or observable specification for monitoring an OPRP. It tells you whether the OPRP is under control. It can be measurable (a concentration of sanitizer) or observable (a visual check that a sieve is intact, that a screen is in place).
Monitoring is also different in nature. CCP monitoring must be able to detect a failure in time for the product to be isolated and evaluated — typically continuous or very frequent measurement. OPRP monitoring must be able to show that the measure is implemented and effective, and can be less immediate.
How to decide: clause 8.5.2.4
ISO 22000 does not leave the choice to intuition. Clause 8.5.2.4 requires the organization to categorize the selected control measures as OPRPs or as CCPs using a systematic approach. For each control measure, the assessment must include:
- its effect on the identified significant food safety hazards, relative to the strictness applied;
- its feasibility for monitoring — for example, the ability to be monitored in a timely manner to enable immediate corrections;
- its place within the system relative to other control measures;
- the likelihood of failure in the functioning of the control measure, or significant processing variability;
- the severity of the consequences in the case of failure;
- whether the control measure is specifically established and applied to eliminate or significantly reduce the level of the hazard;
- synergistic effects — interactions between two or more measures that make their combined effect greater than the sum of their individual effects.
In practice, a control measure tends to be a CCP when it is specifically designed to eliminate or reduce the hazard, when failure would have severe consequences, and when it can be monitored against a measurable limit in time to act — pasteurization, cooking, metal detection. It tends to be an OPRP when it contributes significantly to controlling a hazard but cannot be monitored in real time against a precise limit, or when it works together with other measures — for example, segregation of allergen-containing raw materials or the control of foreign bodies through sieves and magnets earlier in the process.
The same measure may be a CCP in one company and an OPRP in another. What matters is that the decision follows the organization's documented method and that the method considers the factors above.
The hazard control plan
CCPs and OPRPs are both managed in the hazard control plan (clause 8.5.4), sometimes called the HACCP/OPRP plan. For each, the organization must document the significant hazards controlled, the critical limits or action criteria, the monitoring procedures, the corrections and corrective actions to take if limits or criteria are not met, the responsibilities and authorities, and the records of monitoring.
When critical limits are exceeded or action criteria are not met, the affected products must be identified and handled as potentially unsafe, in accordance with clause 8.9.4. For CCPs, product produced while a critical limit was exceeded cannot simply be released; it must be evaluated. For OPRPs, the organization must evaluate the cause and consequences of the failure and decide on the product's disposition based on that evaluation.
What auditors look for
- A documented categorization method. Is there a systematic approach, and does it address the factors in 8.5.2.4? A decision tree is acceptable if it covers them; a list of conclusions without reasoning is not.
- Consistency with the hazard assessment. Is every significant hazard controlled by at least one CCP or OPRP? Are there OPRPs or CCPs controlling hazards that the assessment did not find significant?
- Valid critical limits and action criteria. Are they justified and validated (clause 8.5.3)? A critical limit taken from habit rather than from a validated source is a weak point.
- Effective monitoring. Can CCP monitoring detect a failure in time? Are OPRP checks actually carried out at the defined frequency, and by competent people?
- Handling of failures. When a limit or criterion was not met, is there evidence of corrections, product evaluation and corrective action?
- "PRPs" that are really OPRPs. A frequent finding is a measure that controls a significant hazard — such as allergen cleaning between products — treated as a general PRP with no action criteria and no monitoring.
OPRPs, HACCP and Codex
Organizations that work only with the classic HACCP approach sometimes ask whether OPRPs are an ISO invention. The concept is specific to ISO 22000, but the idea behind it is shared: the 2020 revision of the Codex General Principles of Food Hygiene introduced the notion of good hygiene practices that require greater attention because they are essential for food safety. The logic is the same — some controls are more than basic hygiene, without meeting the criteria for a CCP.
Frequently asked questions
Is it acceptable to have no CCPs?
It is possible, if the systematic categorization shows that all significant hazards are controlled by OPRPs. Auditors will look closely at the reasoning, especially for processes where a CCP would normally be expected.
Can a hazard be controlled by both an OPRP and a CCP?
Yes. A combination of control measures is common — for example, an OPRP that reduces the initial contamination, and a CCP that eliminates the hazard later in the process.
Want to go deeper? If you want to prove your knowledge, the ISO 22000 FSMS practitioner and ISO 22000 FSMS auditor certifications are smart options.